当前位置:网站首页 > 新闻中心 > 行业新闻
行业新闻
  • 焊机故障放电极起弧枪嘴不喷火
  • 本站编辑:杭州雄盛机械有限公司发布日期:2018-03-12 10:19 浏览次数:
判断可能是气压过大…调节后仍不能喷火…后检查输出气电一体接头胶木老化…拆开后发现因为胶木击穿…造成高频漏于外壳!不能喷火…更换后正常!收工
It may be that the pressure is too big. After adjusting, it still can't fire. After checking the output of gas electric integrated joint bakelite aging... Apart and found that because of bakelite breakdown... Cause high frequency leakage in the shell! Can't spray fire... After the replacement is normal! Call it a day
等离子有高频有空载不打火的故障很多 气压 高频强度不够 漏高频 吸收电路 电路受高频干扰等很多因素都会引起不切割
There are many faults in plasma, such as high frequency, no load and no fire. Many air pressure and high frequency intensity are not enough. Leakage of high-frequency absorption circuit and high-frequency interference will cause non cutting.
友情链接: Google Woodworking saw blade Table saw blade Forklift hydraulic parts Imported Forklift Parts China Forklift Spare Parts Pneumatic tourniquet Splicing screen 双铱金火花塞价格 无热吸干机 杭州机箱加工 pvc贴面板生产厂家 硬脂酸锌 http://www.zjpdhb.com 智能污水处理机 上海户外广告机 饮料瓶厂家 比泽尔压缩机 整体橱柜厂 http://www.hzwxsw.com 硬脂酸钡 杭州结构设计 纳米氧化铝 碎石同步封层车 http://www.hzxrqc.com
友情链接:杏彩彩票开户  W彩票注册  幸运彩票官网  天天彩票注册  M5彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!